|
CONSTRUCTION:
Body and mounting plate are cast aluminum construction.
Fasteners are 300 series stainless steel.
|
|
FINISH:
Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.
Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
|
|
PANELS/LENS/GLOBE:
Frosted, annealed glass lens Reflector is a stamped specular aluminum.
|
|
LAMPING:
10W maximum T3 bi-pin lamp.
Higher wattages may be used only with glass panels installed.
10W T3 lamp is included with fixture.
|
|
ELECTRICAL ASSEMBLY:
Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads.
12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1 wire.
Low voltage quick connector, catalog #GLVC3 included for easy hook-up to the low voltage supply cable, not included.
12 Volt system requires remote transformer, not included.
|
|
INSTALLATION & MOUNTING:
Two (2) Stainless #8 wood screws (supplied) via key slots.
|
|
WARRANTY:
Three-year limited warranty.
|
|
CERTIFICATIONS:
ETL Listed to U.S. safety standards for wet locations.
ETL Listed to Canadian safety standards for wet locations.
Manufactured to ISO 9001:2000 Standards.
|
|
Height:
3 1/2" (89mm) |
|
Width:
3 1/2" (89mm) |
|
Depth:
1 7/8" (48mm) |
|
Max. Weight:
0.30 lb |